3" OD X 36" Long feed_Constant Torque Stainless Steel Hose Clamp HEL braided hose is used

HEL braided hose is used in every in-house development project and has been proven in international and televised events

This 2" ID silicone coupler is 12 inches long

Recommended clamps are 94100-0288 on the small end and 94100-0312 on the big end

The PTFE liner also prevents the fuel hose from hardening and will not allow the hose to fracture or crack

This 2-3/4" silicone coupler is 6 inches long

3" OD X 36" Long feed_Constant Torque Stainless Steel Hose Clamp HEL braided hose is usedStandard aluminum intake tubing. 6061T6 alloy . 063 wall thickness. Cuts easily with a hack saw. About 1 1 2 inches on each end goes inside an intake hose (minimum 1 inch). Mill finish (as it arrives at our location from the mill after traveling on a truck and being handled several times) may have minor defects and small scratches, but no dents or major defects. Made in USA.