Silicone Hose, 4.00" I.D. 135 degree Elbow, 4" Legs Color:Red These anodized aluminum joiner nipples

These anodized aluminum joiner nipples are designed for splicing together our 60mm (2 3/8") ID silicone coolant and turbo intake hose

The 4-ply reinforcement results in a working pressure rating in excess of 25 psi (114 psi burst pressure) and a 5mm wall thickness (67mm / 2 5/8" OD)

Silicone hose is for use on intake systems only

Use our Hose Joiners (HJ63) and our Lined Hose Clamps (Part No

These 45 degree reducer elbow hoses have a 38mm ID at one end and a 25mm ID at the other end to connect a 1 1/2" OD tube to a 1" OD tube

Silicone Hose, 4.00" I.D. 135 degree Elbow, 4" Legs Color:Red These anodized aluminum joiner nipplesOur silicone hose is built for endurance and performance in custom coolant and turbo intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 135 degree elbows have a 4" ID with a smooth, shiny "wipe down" finish. The legs measure at least 4 inches long (measured from