Maretron Pressure Transducer 0 to 3 PSI Colour:Default 2 on 14th October 2016

2 on 14th October 2016

Its glass bonded high-contrast monochrome LCD display avoids fogging

Once connected the MS-RA50 will have full control of the iPod or iPhone music interface

Included rubber washer allows tightening of the hull nut to irregular hull surfaces

The elbow easily connects to a tee or double-ended cordsets making 90 [degree] turns practical at the end or anywhere along the line

Maretron Pressure Transducer 0 to 3 PSI Colour:Default 2 on 14th October 2016All Maretron pressure transducer assemblies are equipped with a NPT male threaded fitting. Install the pressure transducer to a NPT female fitting on the system or tank to be monitored with a maximum torque of 133 to 177 in lbs (15 to 20 Nm). If you are monitoring a system where pressure spikes or transients will occur or where the pressure will exceed the maximum pressure rating of the pressure transducer install a Pressure Snubber (PT SNUB 01) onto