Schwenk 31600501 Indicating plug Gauge OD Range 180.1-190 mm mm h=1.2 Ø, Sleeve Dimension H=55.00mm, Blind Hole Version Tensile / Pull MPE measuring range: 9 µm

MPE measuring range: 9 µm

then on the plus side10

The other anvil sets are then fitted as required without further re-setting

calculate distances between holes

4 x 1 1/32 in

Schwenk 31600501 Indicating plug Gauge OD Range 180.1-190 mm mm h=1.2 Ø, Sleeve Dimension H=55.00mm, Blind Hole Version Tensile / Pull MPE measuring range: 9 µmApplication For quick comparison measurements of bores during series inspections. The slightly undersized, ground sleeve is used to guide and centre the plug gauge in the bore. Execution Cemented carbide measuring contacts and measuring needles (wear resistant) Plug gauge from dia. 130 mm can be supplied as a cross shaped sleeves or cross shaped sleeves with skids Version for blind holes with reduced face size Advantage Easy to use Minimum measuring