T-Probe-25 ft-1 - Temperature Sensor with 25 foot cable 10 pack:T-Probe-25ft-1 - Temperature Sensor with 25 foot cable Pin 1 = +5 volt

Pin 1 = +5 volt return (unused)

spec-table { width: 100%

5°C: +20°C to +75°C (with software correction)'

3°C outside this range'

word-break: normal

T-Probe-25 ft-1 - Temperature Sensor with 25 foot cable 10 pack:T-Probe-25ft-1 - Temperature Sensor with 25 foot cable Pin 1 = +5 voltThis 25 ft temperature sensor cable works with all Link and LinkHub interfaces, as well as with AEM systems. The RJ 45 connector comes standard, but it can be removed and replaced with a different connection if needed. The T Probe can also be hard wired into the bus. Weight, power, RFI, etc. of the cable will determine the 1 Wire bus criteria. The lower third of the sensing unit itself is enclosed by our low pressure molding machine, using OM633 from